Flocculation mixer in the mixing equipment in the core position. In the process of designing and using the mixer, the structure, movement and working parameters of the mixer are reasonably selected, which is directly related to the mixing quality and efficiency. Complete flocculation flocculation after (often called the reflecting pool, water fluoride removal equipment) HIYOUNG, occupies an important position in water purification cuisine. The particle size of the suspended spirit and body spirit in the natural water is very fine. For the removal of these spirits by coagulation normally trickery, that is to say the appropriate coagulant in raw water, after full mixing, the colloid is quiet by bad (destabilization) and mixed phase adsorption and polymer coagulant in water after the particles with flocculation performance.
The purpose of the flocculation tank is to create the appropriate hydraulic conditions so that the flocculation performance of the particles in the mutual contact aggregation, in order to form a larger flocculation (flocculation). Therefore, the reaction pool design is appropriatein relation to the effect of flocculation, sedimentation and flocculation effect has direct impact to follow-up treatment. Flocculation mixer is a mechanical agitation of the device, it is mainly used for wastewater treatment of the mixing process.
The design mentioned the structure design of the reaction tank, the structure design of the mixer, the selection of the motor and reducer, the support design of the mixer, the seal design and the process flow. In the design process, we should fully consider the distance from the top of the pond, the bottom and the side wall, and the sealing problem of the shaft.